Prowin Terminal Download

Access the program mode with this program.

This is a direct copy of the program and will not require you to install or configure anything.
Just complete the following steps.

1. Download zipped ProWin folder You may launch the ProWin application directly from the folder or Copy the ProWin folder to your hard drive.
2. Look for a file called PW.EXE. This command will start the program.
   It is already configured for 8 bits, NO parity, 1 stop bit and 9600 baud on Com Port 1.
3. Use the following programmed "Function" keys
   

   F9 Enter program mode
   NL6000 - Review Section 6 of the NL6000 Users Manual
   NL5500 - Review Section 6 of the NL5500 Users Manual

   F10 Exit program mode

   F3 Sends a transmit string., (:TEST1234) This is for testing the radios transmitter to another radios receiver.
   
   

   Important Note: Do not change the Diagnostic settings 6 to 9 as these are radio specific, factory adjusted and require specialized radio test equipment.

   For the NL6000 refer to the NL6000 User Manual for specific configuration settings.

   For the NL5500 refer to the NL5500 User Manual for specific configuration settings.